How to clean your Spray Tan Gun
Keep your spray gun clean and efficient with the Sjolie Gun Cleaning Solution. Designed to breakdown leftover residue and build up, using the gun cleaning solution on a routine basis will leave your applicator sanitized, clean and will prolong the life of your equipment.Now more than ever, sanitation and cleanliness is a top factor in the beauty industry. Technicians worldwide are striving to provide a clean and healthy atmosphere in their salons or mobile appointments. So while we are disinfecting our rooms and taking extra precautions for each spray tan appointment, how can we ensure that the essential tool we use every day is staying clean and sanitized?
Did you know that if you purchase an applicator with Sjolie, you have access to a complimentary deep cleaning for your spray gun? While this is an excellent tool to utilize, did you know that it is very straightforward to perform deep clean on your own? In addition to your daily applicator maintenance, perform a deep clean every 2-3 months based on your daily volume to have your applicator spraying in tip-top shape.You should perform daily maintenance between appointments and at the end of every business day. By thoroughly rinsing your applicator with warm tap water and letting air dry. You can do this by removing your solution cup and flipping your applicator upside down to allow running water through your solution straw while you hold the trigger until the water sprays clear. Be sure to avoid allowing any water through the air feed tube.
Next, you will want to rinse your solution cup out with water. Make sure to wipe down the threads on your cup to avoid any dried solution build-up. Allow the cup to dry on a clean paper napkin or towel.
At the end of the week, we recommend filling your solution cup with 100 ML of warm water and two caps of gun cleaning solution. Turn on your machine and spray the mixture into a towel. Once complete, you can use your damp towel to wipe down your tent or your machine!
While disassembling your applicator may seem intimidating, know that Sjolie is here to assist you every step of the way!
While simple warm water will suffice for your day to day maintenance, you will want to make sure you are cleaning your applicator with an HVLP designed formula. Sjolie Gun Cleaning Solution was specifically designed for spray tan applicators and 100% safe for your applicator. This formula is gentle on your equipment while tough on spray tan solution build-up.
A deep clean should be performed on your applicator every 2-3 months, depending on your spray tan volume.Items Needed:
- Sjolie Gun Cleaning Solution
- Small to medium soak tub
- Bristle brush included with your applicator
- Clean paper or cloth towel
- Small Wrench
- Pipe cleaner (suggested but optional)
No, we do not advise using Dawn or other soaps to clean gun parts as these soaps can leave residue behind and cause clogging in your applicator.It is not necessary to clean after every appointment. However, you do want to make sure you are cleaning the applicator at the end of your work-day.Yes, in conjunction with your daily cleanings, you should also add 2 parts of Sjolie Gun Cleaner and 1 part warm water to your solution cup and spray out of your applicator on a weekly basis. This will decrease build-up and ensure you have a beautiful spray pattern with every appointment!We recommend, based on your typical volume, performing a deep clean every 2-3 months.
The higher volume you have, the more often we recommend cleaning.No. You must use an oil designed for air tools. This oil can be found at any local hardware store.When soaking the applicator parts, we recommend using 2 parts Sjolie Gun Cleaner and 1 part warm water. When running Sjolie Gun Cleaner through your applicator, you will use the same measurements. Spray into a towel until the solution has emptied. Then remove the solution cup and store until you are ready to use.Depending on the amount of build up your gun has; we recommend soaking anywhere between 20 minutes to overnight.All applicator parts must be completely dry before putting back together.
You can simply leave the parts out to dry overnight, or for a faster dry, you can use the air from your HVLP hose.Once you have performed your daily cleaning, remove the solution cup and face upside down so the solution cup can completely dry. Then hang your applicator by the top hook on any handle or secure hanger.No, the Sjolie Multi-Surface Disinfectant is not intended to be used as a Gun Cleaner and should only be used to disinfect hard surfaces.We’ve got your back, babe! As mentioned, if you have purchased your Apollo or Fuji applicator with Sjolie, we offer troubleshooting services that include: diagnostic assessment, deep cleanings, and replacement of parts. Send your applicator into Sjolie for one of our master technicians to carefully work on your applicator!